+86-531-88919688
Address: A4-08 Cross-Border Industrial Park Fenghuangshan Road, Tianqiao District, Jinan City, Shandong, China(Mainland)
TEL: +86-531-88919688
Mob: +86-13905313508
Email: allplace@allplace.cn
Website: www.apuvcoating.com
the product is widely used as active monomer material to improve the adhesion, hardness, wear resistance/abrasion performance, the surface glossness/ the degree of surface finish, the temperature of glass transition, water resisting property and compatibility with other materials. At the same time, it can lower the viscosity, surface tension and chroma of the basic resins.
Chat NowProduct Presentation
IBOMA is used in UV curing as active monomer material environmentally. At present, only China, USA, Germany and Japan can manufacture it. We have obvious advantage with the China-original raw material Comphene, so the price is competitive and have the better quality than other suppliers. And, we have technology can make the product according to the request from the custom.
 |  |
Parameter
Chemical Specification
Item | Specification |
Chroma(APHA) | ≤50 |
Monomer content (%) | ≥99 |
Water content (%) | ≤0.1 |
Acid value (%) | ≤0.1 |
Inhibitor Content(MEHQ.ppm) | 100 |
Polymer content | None |
Physical Index
Item | Index |
molecular weight | 222 |
Boiling point (℃/℉) | 119 |
Refractive index (30℃) | 1.475 |
Viscosity | 9-15 |
Flashing point (℃) | 119 |
Density (at 25℃ g/ml) | 0.97-0.99 |
Temperature of glass transition (℃) | 170 |
Application Notes
For heat-resistant organic sheet, optical fiber, adhesive, screen printing ink vehicle, modified powder coating, clean coating, high solid low viscosity coating, etc .; also as a reactive diluent, resin toughness modified monomer to Improve the resin dispersion of the pigment
In the acrylic resin formulation, can effectively reduce the viscosity of the polymer solution, in a variety of loop monomer, IBOMA the most obvious effect of reducing the viscosity. (The general amount of five percent to ten percent will have a more obvious effect)
IBOMA is suitable for the manufacture of high Tg thermoplastic acrylic resins with high hardness, high alcohol and heat resistance. And has good flexibility. Adhesion and moisture resistance, weather resistance, is a highly characterized structure of the new acrylate monomer for the manufacture of such as PET, PE, PP and other soft plastic film coating
Safety and Sanitation
This product is colorless transparent liquid, insoluble in water, low-toxic, non-flammable
Harmful by inhalation and if swallowe
Irritating to eyes, respiratory system and skin.
Wear suitable protective clothing, gloves and eye/face protection.
case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
Avoid release to the environment. Refer to MSDS
-UV Varnish For Artificial Marble
A4-08 Cross-border Industrial Park Fenghuangshan Road, tianqiao district, Jinan city, Shandong province
+86-531-88919688
+86-13905313508
